LTP Series

THERMOLAST® V

The LTP series is your material solution for applications with sealing function and temperature resistance requirements. The compounds are characterized by their adhesion to PP. They are available in black and natural colors. Natural color variants can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural, Black

Typical applications

  • Seals
  • Fastenings
  • Grommets
  • Attenuators for electronic housings
  • Connectors
  • Mechanical components
  • Distance profiles

 

Material advantages

  • Long-term sealing function
  • Optimized compression set
  • Hysteresis
  • Adhesion to PP
  • Optimized mechanical properties
  • In-process recycling possible
  • Temperature stability up to 120 °C

 

Regulations / Approvals *

  • VW 50123
  • BMW GS 93042
  • Daimler DBL 5562
  • GM GMW15702
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
CS 24 h/120 °C
DIN ISO 815-1 Method A
%
TV5LVN Natural 50 1.050 4.0 400 12.0 12 33 43 45
TV5LVZ Black 50 1.050 4.0 400 9.0 15 24 39 46
TV6LVN Natural 58 1.050 5.0 400 15.0 13 35 38 42
TV6LVZ Black 60 1.050 5.0 400 15.0 13 35 38 41
TV7LVN Natural 68 1.050 7.5 450 15.0 14 36 37 43
TV7LVZ Black 68 1.050 6.5 400 15.0 14 36 37 41
TV8LVN Natural 79 1.050 10.0 450 21.0 22 42 44 52
TV8LVZ Black 79 1.050 9.5 450 23.0 19 37 41 51
TV9LVN Natural 89 1.050 13.5 450 30.0 33 52 60 67
TV9LVZ Black 89 1.050 12.5 450 27.0 26 52 52 60
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.