UV/HF/SF Series

THERMOLAST^® K

The UV/HF/SF series is your material solution for applications with long flow paths and high requirements on surface quality. It features in processability with a low mold cavity pressure and is suitable for automotive exterior application due to its high UV resistance. The compounds are available in black color.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

Water deflectors
Static window encapsulations
Roof railing underlays
Cowls gaskets
Air guide elements

Material advantages

Weather resistant, suitable for automotive exterior
Optimized flow properties
Surface mapping
Adhesion to PP
In-process recycling possible
Low mold cavity pressure

Regulations / Approvals *

DIN 75201-B - Fogging
VDA 270 B3 - Odor
49 CFR §571.302 (FMVSS 302)
PV 3930 Florida (1 year)
PV 3930 Florida (2 years)
PV 3929 Kalahari (1 year)
PV 3929 Kalahari (2 years)
Outdoor Weathering Florida 24 month SAE J1976
Outdoor Weathering Arizona 24 month SAE J1976
VW 50123
BMW GS 93042
Mercedes-Benz DBL 5562
Stellantis B62 0300
Renault 03-10-104
Ford WSS-M2D517
GM GMW 16233

Datasheet to download

Please choose language of datasheet

PDF file - 1MBDeutsch

PDF file - 1MBEnglish

PDF file - 1MBEspañol

PDF file - 1MBFrançais

PDF file - 1MBItaliano

PDF file - 1MB日本語

PDF file - 1MB한국어

PDF file - 1MBPolski

PDF file - 1MB中文

Compound name	Color / RAL DESIGN	Hardness DIN ISO 48-4 Shore A	Density DIN EN ISO 1183-1 g/cm3	Tensile Strength DIN 53504/ISO 37 MPa	Elongation at Break DIN 53504/ISO 37 %	Tear Resistance ISO 34-1 Method B (b) N/mm	Flow Spiral [760 bar, DSOP Lab 2032 cm
TC5HFZ	Black	49	1.030	5.0	700	12.0	115.0
TC6HFZ	Black	60	1.030	5.0	680	14.0	110.0
TC7HFZ	Black	72	1.020	5.0	550	19.0	100.0
TC8HFZ	Black	77	1.020	6.0	520	19.0	90.0
TC9HFZ	Black	86	1.000	8.0	500	25.0	80.0

A detailed suitability test of the component design is required for use in sealing applications.

All values published in this data sheet are rounded average values.

The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!

For further information and individual custom solutions please contact our customer service.

* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.