CS Series

THERMOLAST® K

The CS series is your material solution for sealing applications with adhesion to PP. The compounds are available in black and natural colors. Natural color variants can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural, Black

Typical applications

  • Seals
  • Fastenings
  • Grommets
  • Cable clips
  • Membranes
  • Applications in e-mobility
  • Bumpers

 

Material advantages

  • Adhesion to PP
  • Temperature stability up to 110 °C
  • Optimized compression set
  • Optimized mechanical properties
  • Optimized resilience
  • In-process recycling possible
  • Resistance to polar coolants

 

Regulations / Approvals *

  • DIN 75201-B - Fogging
  • 49 CFR §571.302 (FMVSS 302)
  • PV 3930 Florida (1 year)
  • PV 3930 Florida (2 years)
  • PV 3929 Kalahari (1 year)
  • PV 3929 Kalahari (2 years)
  • VW 50123
  • BMW GS 93042
  • Mercedes-Benz DBL 5562
  • Stellantis B62 0300
  • Renault 03-10-104
  • Stellantis MS-DC-242
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b)ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
CS 24 h/120 °C
DIN ISO 815-1 Method A
%
TC3CSN Natural 28 1.100 4.7 550 11.0 15 18 33 58
TC3CSZ Black 30 1.100 4.7 550 11.0 17 20 34 58
TC4CSN Natural 37 1.100 5.5 600 14.0 16 21 34 60
TC4CSZ Black 37 1.100 5.5 600 14.0 16 21 34 60
TC5CSN Natural 46 1.100 7.0 550 14.0 17 21 35 60
TC5CSZ Black 50 1.100 7.0 550 14.0 17 21 35 60
TC6CSN Natural 57 1.100 8.5 550 17.0 18 22 37 62
TC6CSZ Black 59 1.100 8.5 550 17.0 22 25 37 62
TC7CSN Natural 68 1.100 9.0 550 21.0 23 29 46 70
TC7CSZ Black 68 1.100 9.0 550 21 23 29 46 70
TC8CSN Natural 78 1.100 10.0 550 25.0 30 40 54 75
TC8CSZ Black 78 1.100 10.0 550 25.0 30 40 54 75
TC9CSN Natural 87 1.100 11.0 500 30.0 36 45 63 80
TC9CSZ Black 87 1.100 11.0 500 30.0 36 45 63 80
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.