You are here
Product Finder
>
MC/AD1 Series
Login

MC/AD1 Series

THERMOLAST® M

The MC/AD1 series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The series is characterized by its adhesion properties to polar thermoplastics such as ABS, PC and PET/PETG. The compounds are available in natural colors and can be colored in many different ways. The compounds are produced exclusively on a special medical unit.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural

Typical applications

  • Seals
  • Flexible Connections
  • Membranes
  • Soft touch application (e.g. handles or push buttons)
  • Valves

 

Material advantages

  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Adhesion to PET and PETG
  • Adhesion to PS
  • Sterilizable (autoclave 134°C, ß-/y-radiation 2x35 kGy, EtO)
  • Soft touch surface
  • Free from animal ingredients
  • KRAIBURG TPE Medical Service Package
  • ISCC PLUS ready (mass balance approach)

 

Regulations / Approvals *

  • VDI 2017
  • ISO 10993-4 (Hemolysis)
  • ISO 10993-5 (Cytotoxicity)
  • ISO 10993-23 (Intracutaneous injection)
  • ISO10993-11 (Acute systemic toxicity)
  • USP <88> (Biological Reactivity, Class VI)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PETG 2
VDI 2019 two-component injection molding
N/mm
TM5ADX-NTRL Natural 49 0.944 5.5 600 10.5 17 36 3.5 (D) 2.5 (D) 3.0 (D)
TM6ADX-NTRL Natural 59 0.945 7.0 650 12.0 21 39 4.5 (D) 4.5 (D) 4.5 (D)
TM7ADX-NTRL Natural 73 1.000 10.0 700 22.0 22 40 4.0 (A) 7.5 (D) 8.0 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.