EX/UV Series

THERMOLAST® K

The EX/UV series is your material solution for extrusion applications with increased requirements for UV resistance. The compounds are available in black and natural colors. Natural color variants can be colored in many different ways. Some compounds of the series are approved according to RAL GZ 716/1 and/or CSTB QB36.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Grey, Natural, Black

Typical applications

  • Distance profiles
  • Seals
  • Molded parts (solar equipment)
  • Edge guards

 

Material advantages

  • Adhesion to PP
  • Halogen-free (according to IEC 61249-2-21)
  • Resistance to acrylic paints
  • UV and weathering resistance
  • Suitable for building and construction outdoor applications
  • Optimized mechanical properties
  • Weldable (Infrared & Mirror)
  • No interaction with other materials (e.g. PVC-U, PP, PS, ABS, POM, PA, PC, PMMA)

 

Regulations / Approvals *

  • RAL-GZ 716/1
  • CSTB/DER/BV-PEM

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
TP5HPG Grey 50 1.150 7.0 750 15 41
TP5HPN Natural 48 1.130 7.0 750 15 32
TP5SKZ Black 50 1.140 7.0 750 19 36
TP6HPG Grey 55 1.130 8.0 750 17 39
TP6HPN Natural 58 1.150 8.0 750 19 38
TP6SKZ Black 59 1.150 8.0 750 20 34
TP7HPG Grey 69 1.140 11.0 750 21 55
TP7HPN Natural 68 1.140 11.0 750 31 46
TP7SKZ Black 68 1.130 11.0 750 20 35
TP8HPN Natural 77 1.130 10.5 700 31 43
TP9HPN Natural 87 1.100 12.0 700 43 63
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.