You are here
Product Finder
>
FG/SF Series
Login

FG/SF Series

THERMOLAST® K

The FG/SF series is your material solution for automotive interior applications with special surface appearance and adhesion to PP. The material offers low emission and odor values combined with high abrasion resistance. The compounds are available in black and many other automotive interior colors.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Automotive Interior
  • Car mats
  • Function and design elements
  • Grip applications
  • Floor mats

 

Material advantages

  • Adhesion to PP
  • Low density
  • Abrasion resistance
  • Optimized flow properties
  • Non-sticky surface
  • Colorable
  • Controlled level of emission and odor, suitable for automotive interior
  • Soft touch surface

 

Regulations / Approvals *

  • VW 50123
  • BMW GS 93042
  • Mercedes-Benz DBL 5562
  • Stellantis B62 0300
  • Renault 03-10-104

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Flow Spiral [760 bar,Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Flammability
49 CFR §571.302 (FMVSS 302)
mm/min
Odor
VDA 270 B-3
NOTE
Fogging
DIN 75201-B
mg
Thermal desorption – VOC
VDA 278
µg/g
Thermal desorption – Fog
VDA 278
µg/g
Color fastness 2
DIN EN ISO 105-B06 Method 3
GS
TC5FEZ Black 52 0.930 7.0 750 110.0 69 3.0 0.58 151 1090 4.5
TC6FEZ Black 62 0.930 7.0 700 100.0 63 3.0 0.15 138 883 4.5
TC7FEZ Black 72 0.930 8.0 650 90.0 57 3.0 0.41 134 601 4.5
TC8FEZ Black 82 0.930 9.0 600 80.0 60 3.0 59 264 4.5
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2Rating after 5 cycles; acc. to DIN EN 20105-A02
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.