You are here
Product Finder
>
FC/HE/tl Series
Login

FC/HE/tl Series

THERMOLAST® K

The FC/HE/tl series is your material solution for everyday life applications with regulatory requirements. The series is characterized by its high elastic properties and its adhesion to PP. The translucent materials can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Household articles
  • Flexible Connections
  • Membranes
  • Seals for housings
  • Valves
  • Packaging (for food and care products)
  • Closures
  • Toys

 

Material features

  • Hysteresis
  • Colorable
  • Optimized mechanical properties
  • In-process recycling possible
  • High elasticity
  • Adhesion to PP
  • Free from animal ingredients
  • ISCC PLUS ready (mass balance approach)

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • EN71-3
  • Compatible for HDPE Recycling certified by Cyclos HTP
  • Compatible for PP Recycling certified by Cyclos HTP

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
TF4AAB Translucent 40 0.890 8.0 700 20.0 25 83 85
TF5AAC Translucent 50 0.890 12.5 750 15.5 18 34 53
TF6AAF Translucent 58 0.890 13.5 750 18.0 23 37 55
TF7AAC Translucent 67 0.890 15.5 750 20.0 26 40 63
TF8AAB Translucent 75 0.890 17.5 750 27.0 30 47 66
TF9AAA Translucent 83 0.890 18.5 700 33.0 37 55 68
TF9AAB Translucent 95 0.900 22.0 650 66.0 52 72 79
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.