LW/UV Series

THERMOLAST® K

The LW/UV Series is your lightweight material solution for applications with high UV- and weathering resistance, especially in automotive exterior. The compounds are available in black colors.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Black

Typical applications

  • Automotive Exterior
  • Water deflectors
  • Roof racks
  • Function and design elements
  • Bumpers
  • Edge guards
  • Heavy-walled parts
  • Cowls gaskets

 

Material features

  • Low density
  • Adhesion to PP
  • UV and weathering resistance
  • Non-sticky surface
  • In-process recycling possible
  • Low shrinkage properties
  • Low tendency to warpage

 

Regulations / Approvals *

  • 49 CFR §571.302 (FMVSS 302)
  • PV 3930 Florida (1 year)
  • PV 3930 Florida (2 years)
  • PV 3929 Kalahari (1 year)
  • PV 3929 Kalahari (2 years)
  • Outdoor Weathering Florida 12 month SAE J1976
  • Outdoor Weathering Florida 24 month SAE J1976
  • Outdoor Weathering Arizona 12 month SAE J1976
  • Outdoor Weathering Arizona 24 month SAE J1976
  • Mercedes-Benz DBL 5562

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
TL6OWG-BLCK Black 60 0.725 2.7 250 10.5 14 24 63
TL7OWG-BLCK Black 70 0.725 3.2 250 13.5 18 30 63
TL8OWG-BLCK Black 80 0.725 3.4 250 17.5 29 48 60
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.