MC/tl Series

THERMOLAST® M

The MC/tl series is your material solution for various applications requiring basic medical approvals such as ISO 10993-5. The series is characterized by its adhesion to PP and PE. The compounds are available in translucent colors and can be colored in many different ways. The compounds are produced exclusively on a special medical unit.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Seals
  • Flexible Connections
  • Mouthpieces
  • Soft touch application (e.g. handles or push buttons)
  • Valves
  • Membranes

 

Material features

  • Adhesion to PP, PE
  • Sterilizable (autoclave 134°C, ß-/y-radiation 2x35 kGy, EtO)
  • Optimized compression set
  • Weldable (Ultrasonic)
  • Free from animal ingredients
  • KRAIBURG TPE Medical Service Package
  • US DMF listed
  • ISCC PLUS ready (mass balance approach)

 

Regulations / Approvals *

  • VDI 2017
  • ISO 10993-4 (Hemolysis)
  • ISO 10993-5 (Cytotoxicity)
  • ISO 10993-10 (Intracutaneous injection)
  • ISO10993-11 (Acute systemic toxicity)
  • USP <88> (Biological Reactivity, Class VI)
  • Compatible for HDPE Recycling certified by Cyclos HTP
  • Compatible for PP Recycling certified by Cyclos HTP

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
TM3MED Translucent 27 0.880 6.5 750 10.0 15 28 47
TM4MED Translucent 36 0.880 8.0 800 11.5 16 26 43
TM5MED Translucent 46 0.880 10.0 850 14.5 24 32 46
TM6MED Translucent 56 0.880 12.0 800 18.0 25 35 51
TM7MED Translucent 68 0.890 13.0 800 23.5 32 40 58
TM8MED Translucent 80 0.890 15.0 750 33.0 38 46 59
TM9MED Translucent 89 0.890 17.0 700 43 42 54 62
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging. Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.