RC/FC/PCR/AP Series

THERMOLAST® R

The RC/FC/PCR/AP series is your material solution with a post-consumer recycled content of 9 - 35 % (hardness-dependent) for a variety of applications with adhesion to PP or for single component parts in Asia Pacific. The compounds are available in natural colors and and precoloration is possible.

Processing Method: Injection Molding
Color / RAL DESIGN: Translucent, Natural

Typical applications

  • Function and design elements
  • Grip applications
  • Handles and grips for consumer applications
  • Toothbrushes
  • Razors
  • Toys
  • Household articles
  • Seals for housings

 

Material features

  • Adhesion to PP
  • Alternative material to EPDM and PVC-P
  • Thermoplastic alternative to elastomers
  • Optimized mechanical properties
  • Non-sticky surface
  • Colorable
  • Temperature stability up to 80 °C
  • Soft, non-sticky haptic
  • Precoloration in all colors
  • Sustainable material

 

Regulations / Approvals *

  • US FDA CFR 21 (raw material conformity)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Recycled raw materials content

%
RF3OGM-LCNT Translucent 30 0.870 2.5 710 9.5 9
RF3OGM-NTRL Natural 31 0.920 6.5 950 9.5 9
RF4OGM-LCNT Translucent 42 0.880 3.0 700 10.5 13
RF4OGM-NTRL Natural 42 0.920 7.0 930 10.5 12
RF5OGM-LCNT Translucent 50 0.880 4.0 650 11.5 15
RF5OGM-NTRL Natural 51 0.920 9.0 900 13.5 14
RF6OGM-LCNT Translucent 60 0.890 6.0 650 15.0 20
RF6OGM-NTRL Natural 62 0.920 10.5 860 17.0 17
RF7OGM-LCNT Translucent 72 0.890 8.5 630 20.0 25
RF7OGM-NTRL Natural 70 0.930 14.5 830 23.0 20
RF8OGM-LCNT Translucent 80 0.900 14.5 650 25.0 31
RF8OGM-NTRL Natural 80 0.930 18.0 800 30.0 25
RF9OGM-LCNT Translucent 90 0.900 20.0 630 35.0 38
RF9OGM-NTRL Natural 93 0.940 30.0 700 60.0 35
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.