UV/HF Series

THERMOLAST^® K

The UV/HF series is your material solution for applications with long flow paths and requirements for UV resistance. The compounds are suitable for automotive exterior applications. They have a low density and are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

Roof racks
Window encapsulations
Water deflectors
Cowls gaskets
Door sills
A/B/C/D cappings and covers
Corner Molding
2-component seals for doors

Material features

Weather resistant, suitable for automotive exterior
Optimized flow properties
Surface mapping
Adhesion to PP
In-process recycling possible
Low density
Low mold cavity pressure

Regulations / Approvals *

DIN 75201-B - Fogging
VDA 270 B3 - Odor
49 CFR §571.302 (FMVSS 302)
PV 3930 Florida (1 year)
PV 3930 Florida (2 years)
PV 3929 Kalahari (1 year)
PV 3929 Kalahari (2 years)
Outdoor Weathering Florida 24 month SAE J1976
Outdoor Weathering Arizona 24 month SAE J1976
VW 50123
BMW GS 93042
Mercedes-Benz DBL 5562
Stellantis B62 0300
Renault 03-10-104
Ford WSS-M2D517

Datasheet to download

Please choose language of datasheet

PDF file - 1MBDeutsch

PDF file - 1MBEnglish

PDF file - 1MBEspañol

PDF file - 1MBFrançais

PDF file - 1MBItaliano

PDF file - 1MB日本語

PDF file - 1MB한국어

PDF file - 1MBPolski

PDF file - 1MB中文

Compound name	Color / RAL DESIGN	Hardness DIN ISO 48-4 Shore A	Density DIN EN ISO 1183-1 g/cm3	Tensile Strength¹ DIN 53504/ISO 37 MPa	Elongation at Break¹ DIN 53504/ISO 37 %	Tear Resistance ISO 34-1 Method B (b) (Graves) N/mm	Flow Spiral [760 bar, 200 °C] DSOP Lab 2032 cm
TC5WEZ	Black	52	0.930	7.0	800	13.0	100.0
TC6WEZ	Black	62	0.930	8.0	750	16.0	95.0
TC7WEZ	Black	72	0.930	8.0	650	20.0	90.0
TC8WEZ	Black	82	0.930	10.5	650	24.0	80.0

¹Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.

All values published in this data sheet are rounded average values.

The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.

For further information and individual custom solutions please contact our customer service.

* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.