The VS/AD1 series is your material solution for consumer electronics applications. It is characterized by a silky and velvety surface. The compounds convince by their adhesion to polar thermoplastics such as ABS, PC or PC/ABS. They are available in black and natural. Naturally colored variants can be coloured in many different ways.
Processing Method:
Injection Molding, Extrusion
Color / RAL DESIGN:
Natural, Black
Please note:Frozen stresses in Polycarbonate (PC) may cause stress cracking in 2-component applications with PC and COPEC®. |
All values published in this data sheet are rounded average values. |
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging. Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided. |
For further information and individual custom solutions please contact our customer service. |
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound. |