The RC/PCR/AM series is your material solution with a post-consumer recycled content up to 44 % (hardness-dependent) for a variety of applications with adhesion to PP or for single component parts for Americas Market. The compounds are available in grey.
Processing Method:
Injection Molding
Color / RAL DESIGN:
Grey
Compound name
|
Color / RAL DESIGN
|
Hardness
DIN ISO 48-4 Shore A |
Density
DIN EN ISO 1183-1 g/cm3 |
Recycled raw materials content
% |
---|---|---|---|---|
RC4OGU-GREY | Grey | 40 | 0.880 | >13 |
RC5OGU-GREY | Grey | 50 | 0.880 | >17 |
RC6OGU-GREY | Grey | 60 | 0.890 | >22 |
RC7OGU-GREY | Grey | 70 | 0.890 | >27 |
RC8OGU-GREY | Grey | 80 | 0.900 | >33 |
RC9OGU-GREY | Grey | 90 | 0.910 | >44 |
All values published in this data sheet are rounded average values. |
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging. Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided. |
For further information and individual custom solutions please contact our customer service. |
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound. |