UV/AD2 Series

THERMOLAST^® K

The UV/AD2 series is your material solution for applications requiring UV resistance and adhesion to polar thermoplastics such as PC, ABS, PC/ABS, ASA and PMMA. It is particularly suitable for automotive exterior applications. The compounds are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

Roof rim covers
Water deflectors
Door sills
Trunk openers
Front triangles
A/B/C/D cappings and covers
Rear spoilers
Brake lights
Head lights

Material features

Adhesion to PC, ABS, PC/ABS, ASA, SAN and PMMA
Surface mapping
Weather resistant, suitable for automotive exterior

Regulations / Approvals *

PV 3930 Florida (1 year)
PV 3930 Florida (2 years)
PV 3929 Kalahari (1 year)
PV 3929 Kalahari (2 years)
Outdoor Weathering Florida 12 month SAE J1976
Outdoor Weathering Florida 24 month SAE J1976
Outdoor Weathering Arizona 12 month SAE J1976
Outdoor Weathering Arizona 24 month SAE J1976
VW 50123
BMW GS 93042
Mercedes-Benz DBL 5562
Renault 03-10-104
GM GMW15702
Rivian

Datasheet to download

Please choose language of datasheet

PDF file - 1MBDeutsch

PDF file - 1MBEnglish

PDF file - 1MBEspañol

PDF file - 1MBFrançais

PDF file - 1MBItaliano

PDF file - 1MB日本語

PDF file - 1MB한국어

PDF file - 1MBPolski

PDF file - 1MB中文

Compound name	Color / RAL DESIGN	Hardness DIN ISO 48-4 Shore A	Density DIN EN ISO 1183-1 g/cm3	Tensile Strength¹ DIN 53504/ISO 37 MPa	Elongation at Break¹ DIN 53504/ISO 37 %	Tear Resistance ISO 34-1 Method B (b) (Graves) N/mm	Flow Spiral [760 bar, 240 °C] DSOP Lab 2032 cm	Adhesion to PC² VDI 2019 two-component injection molding N/mm	Adhesion to ABS² VDI 2019 two-component injection molding N/mm	Adhesion to ASA VDI 2019 two-component injection molding N/mm
TC5MUZ	Black	55	1.070	8.0	650	17.0	60.0	2.5 (C)	2.4 (C)	2.4 (C)
TC6MUZ	Black	65	1.100	9.0	650	23.0	47.0	4.5 (C)	4 (C)	3.9 (C)
TC7MUZ	Black	75	1.100	12.0	640	28.0	41.0	6.0 (C)	8.0 (C)	9.0 (C)
TC8MUZ	Black	83	1.100	12.0	620	33.0	40.0	6.0 (B)	7.0 (A)	5.0 (A)

¹Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
²The adhesion quality depends on mold design, product geometry and process parameters.

All values published in this data sheet are rounded average values.

The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.

For further information and individual custom solutions please contact our customer service.

* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.