You are here
Product Finder
>
RC/AD1 Series
Login

RC/AD1 Series

THERMOLAST® R

The RC/AD1 series is your material solution with a PCR/PIR content of > 42% for a variety of applications with adhesion to ABS and PC. The compounds are available in natural colors and can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Natural

Typical applications

  • Grip applications
  • Function and design elements
  • Soft touch
  • Toys
  • Over molded housing
  • Fasteners

 

Material features

  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Recycled raw material content
  • Sustainable material
  • Reduced PCF compared to virgin compound
  • In-process recycling possible
  • Recycling-specific raw material influences are possible
  • Colorable

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
Long term temperature stability without stress from -40°C up to
KRAIBURG TPE test method
°C
Recycled raw materials content
%
RR4PGD-NTRL Natural 40 1.100 2.0 450 7.0 2.1 (B/D) 1.6 (A) 70 54
RR5PGD-NTRL Natural 50 1.150 2.0 450 9.0 2.8 (D) 2.8 (B) 70 51
RR6PGD-NTRL Natural 60 1.150 4.0 450 12.0 4.8 (D) 5.0 (D) 70 47
RR7PGD-NTRL Natural 70 1.150 4.0 450 15.0 6.1 (D) 6.2 (D) 70 42
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.