FC/S Series

THERMOLAST® S

The FC/S series is your super-soft material solution for everyday life applications with regulatory requirements and outstanding dry and pleasant surface haptics. The compounds are available in translucent and can be colored in many different ways.

Processing Method: Injection Molding
Color / RAL DESIGN: Translucent

Typical applications

  • Cushioning
  • Protectors
  • Toys
  • Baits
  • Function and design elements
  • Fun articles
  • Seals
  • Bumpers
  • Grommets

 

Material features

  • Soft, velvety feel
  • Dry haptics
  • Optimized mechanical properties at low hardnesses
  • Resilience
  • Elasticity
  • Precoloration in all colors
  • Colorable, also in effect colors
  • Free from animal ingredients
  • No silicones added
  • Suitable for processing in granule-based 3D printing

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21 (raw material conformity)
  • EN71-3
  • ISO 10993-10 (Skin irritation)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
ASTM D 2240
Shore 00
Hardness
DIN ISO 48-3
VLRH
Density
DIN EN ISO 1183-1
g/cm3
Modulus 100% 1
DIN 53504/ISO 37
MPa
Modulus 300% 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
TF3ZGO-LCNT Translucent 32 48 0.870 0.1 0.1 >1000
TF4ZGO-LCNT Translucent 45 60 0.873 0.1 0.2 >1000
TF5ZGO-LCNT Translucent 51 69 0.875 0.2 0.2 >1000
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.