DW/H Series

THERMOLAST® K

The DW/H series is your material solution for hoses, jet former and other applications in contact with drinking water. The compounds are approved according to important European drinking water standards. They are translucent and are available in many different colors on request.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Shower hoses
  • Hoses for household appliances
  • Jet former
  • Grip applications
  • Soft touch
  • Seals, functional and design elements in sanitary sector

 

Material features

  • Low kinking tendency
  • Optimized mechanical properties
  • Adhesion to PP
  • Alternative material to PVC-P
  • Surface with low sensitivity to dirt
  • Plasticizer free
  • Resistance to microbes
  • Precoloration in all colors

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • DVGW Arbeitsblatt W270
  • KTW
  • ACS (DGS/VS4 n° 200/232)
  • WRAS: BS6920-1:2000 and/or 2014 cold water (23 °C)
  • WRAS: BS6920-1:2000 and/or 2014 warm water (60 °C)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
PDF file W270-TF5WHA-TF8WHA-2020-2025-en-
PDF file KTW-TF5WHA-TF8WHA-2020-2025-en-
PDF file WRAS-TF5WHA-TF8WHA-
PDF file ACS-TF5WHA-TF8WHA
PDF file KTW-TF5WHA-TF8WHA
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
TF5WHA Translucent 55 0.900 15.0 750
TF6WHA Translucent 65 0.900 16.0 700
TF6WHB Translucent 60 0.900 16.0 750
TF7WHA Translucent 75 0.900 17.0 730
TF7WHB Translucent 70 0.900 16.0 750
TF8WHA Translucent 85 0.900 18.0 700
TF8WHB Translucent 80 0.900 17.0 750
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.