EC/PA Series

THERMOLAST® K

The EC/PA series is your material solution for applications with requirements on electrical conductivity. The materials come with low resistivity and adhesion to polyamides and polypropylene. The compounds are halogen-free according to IEC 61249-2-21. They are available in black colors only.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Electric and electronic components
  • Stylus
  • Grip applications
  • Grommets
  • Flexible conductors
  • ESD protection
  • Dead man's switches
  • Sensors

 

Material features

  • Electrical conductivity
  • Low resistivity
  • Adhesion to PA6 and PA6.6
  • Soft, non-sticky haptic
  • Adhesion to PP
  • Halogen-free (according to IEC 61249-2-21)
  • In-process recycling possible

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Electrical resistivity
ISO 3915
Ωcm
Adhesion to PA 6 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PA 6.6 2
VDI 2019 two-component injection molding
N/mm
TC7NEG-BLCK Black 70 0.970 9.0 600 30.0 55 <1000 7.0 (C) 6.5 (C)
TC8NEG-BLCK Black 83 0.960 9.0 550 35.0 55 <1000 7.5 (D) 7.5 (D)
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.