RC/PCR/AP Series
THERMOLAST® R
The RC/PCR/AP series is your material solution with a post-consumer recycled content of 20 - 48 % (hardness-dependent) for a variety of applications with adhesion to PP or for single component parts for Asia Pacific Market. The compounds are available in black colors.
Processing Method:
Injection Molding
Color / RAL DESIGN:
Black
Typical applications
- Grommets
- Function and design elements
- Handles (hand tools and power tools etc.)
- Grip applications
- Connectors
- Cable clips
- Electric and electronic components
Material features
- Adhesion to PP
- Alternative material to EPDM and PVC-P
- Thermoplastic alternative to elastomers
- Optimized mechanical properties
- Non-sticky surface
- Temperature stability up to 80 °C
- Sustainable material
Compound name
|
Color / RAL DESIGN
|
Hardness
DIN ISO 48-4 Shore A |
Density
DIN EN ISO 1183-1 g/cm3 |
---|---|---|---|
RC5OGM-BLCK | Black | 52 | 0.950 |
RC6OGM-BLCK | Black | 61 | 0.950 |
RC7OGM-BLCK | Black | 71 | 0.970 |
RC8OGM-BLCK | Black | 82 | 0.980 |
RC9OGM-BLCK | Black | 90 | 0.990 |
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values. |
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging. Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided. |
For further information and individual custom solutions please contact our customer service. |
On Off Region Article
Download
Event
ktpe_glossary_term
News
Press