AD1/CS Series

THERMOLAST® K

The AD1/CS series is your material solution for applications with optimized compression set and adhesion to polar thermoplastics such as ABS, PC, PC/ABS, and PBT. The compounds are available in black and natural colors. Natural color variants can be colored in many different ways.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Natural, Black

Typical applications

  • Seals
  • Function and design elements
  • Cable clips
  • Bumpers
  • Grommets
  • Soft touch surface (thumb wheels, push buttons, switches)

 

Material features

  • Adhesion to PC, ABS, PC/ABS, ASA, SAN
  • Adhesion to PBT
  • Optimized compression set
  • Optimized mechanical properties

 

Regulations / Approvals *

  • 49 CFR §571.302 (FMVSS 302)
  • VW 50123
  • BMW GS 93042
  • Mercedes-Benz DBL 5562
  • Stellantis B62 0300
  • UL 94 HB

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC/ABS 2
VDI 2019 two-component injection molding
N/mm
Short term temperature stability under stress -40°C up to
KRAIBURG TPE test method
°C
Short term temperature stability without stress -40°C up to
KRAIBURG TPE test method
°C
Long term temperature stability without stress from -40°C up to
KRAIBURG TPE test method
°C
TP5VCN Natural 47 1.100 3.5 500 12.0 20 43 72 3.0 (D) 3.0 (C/D) 4.0 (D) 80 135 110
TP5VCZ Black 50 1.100 3.5 450 12.0 20 43 72 3.0 (C/D) 3.0 (B) 3.5 (C/D) 80 135 110
TP6VCN Natural 60 1.100 6.0 550 15.0 21 45 67 6.0 (D) 5.5 (D) 6.0 (D) 80 135 110
TP6VCZ Black 60 1.100 6.0 550 15.0 21 45 67 6.0 (D) 6.0 (D) 6.0 (D) 80 135 110
TP7VCN Natural 66 1.100 7.5 650 17.0 22 46 66 5.0 (D) 6.5 (D) 6.5 (D) 80 120 100
TP7VCZ Black 68 1.100 7.5 650 17.0 23 46 65 6.0 (D) 7.0 (D) 7.0 (D) 80 120 100
TP8VCN Natural 77 1.100 9.0 600 23.0 26 48 67 5.5 (C) 9.5 (D) 9.5 (D) - - -
TP8VCZ Black 79 1.100 10.0 600 25.0 26 48 67 6.0 (C) 10.0 (D) 10.0 (D) - - -
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.