RC/AD1/AP Series

THERMOLAST® R

The RC/AD1/AP series is your material solution with a hardness-dependent post-industrial recycled content of 34 - 50% for applications with adhesion to ABS, PC and PC/ABS for the Asian Pacific market. The compounds are suitable for consumer electronic applications and are available in black and natural colors. Pre-coloration is possible.

Processing Method: Injection Molding
Color / RAL DESIGN: Black, Natural

Typical applications

  • Function and design elements
  • Handles and grips for consumer applications
  • Handles (tools, toolboxes, ski poles)
  • Soft touch surface (thumb wheels, push buttons, switches)
  • Games consoles
  • Remote controls
  • Ear phones
  • Household articles
  • Wearables

 

Material features

  • Optimized mechanical properties
  • Non-sticky surface
  • Colorable
  • Sustainable material
  • Adhesion to PC, ABS, PC/ABS
  • Smooth touch

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
Adhesion to ABS 2
VDI 2019 two-component injection molding
N/mm
Adhesion to PC 2
VDI 2019 two-component injection molding
N/mm
Recycled raw materials content

%
RI6PGM-BLCK Black 62 1.060 6.0 480 21.0 2.5 (B) 3.0 (B) 34
RI6PGM-NTRL Natural 61 1.060 5.5 500 20.0 2.5 (B) 3.0 (B) 35
RI7PGM-BLCK Black 72 1.100 9.0 500 29.0 4.5 (C) 4.0 (C) 41
RI7PGM-NTRL Natural 71 1.100 9.0 520 28.0 5.0 (C) 4.0 (C) 42
RI8PGM-BLCK Black 79 1.100 12.0 500 32.0 5.5 (C) 4.5 (C) 49
RI8PGM-NTRL Natural 81 1.100 12.0 510 32.0 5.5 (C) 4.5 (C) 50
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min. Specimens were tempered for 20 hrs at 100°C (212°F).
2The adhesion quality depends on mold design, product geometry and process parameters.
All values published in this data sheet are rounded average values.
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging.
Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided.
For further information and individual custom solutions please contact our customer service.