LW/UV Series
THERMOLAST® K
The LW/UV Series is your lightweight material solution for applications with high UV- and weathering resistance, especially in automotive exterior. The compounds are available in black colors.
Processing Method:
Injection Molding, Extrusion
Color / RAL DESIGN:
Black
Typical applications
- Automotive Exterior
- Water deflectors
- Roof racks
- Function and design elements
- Bumpers
- Edge guards
- Heavy-walled parts
- Cowls gaskets
Material advantages
- Low density
- Adhesion to PP
- UV and weathering resistance
- Non-sticky surface
- In-process recycling possible
- Low shrinkage properties
- Low tendency to warpage
Regulations / Approvals *
- 49 CFR §571.302 (FMVSS 302)
- PV 3930 Florida (1 year)
- PV 3930 Florida (2 years)
- PV 3929 Kalahari (1 year)
- PV 3929 Kalahari (2 years)
- Outdoor Weathering Florida 12 month SAE J1976
- Outdoor Weathering Florida 24 month SAE J1976
- Outdoor Weathering Arizona 12 month SAE J1976
- Outdoor Weathering Arizona 24 month SAE J1976
- Mercedes-Benz DBL 5562
Compound name
|
Color / RAL DESIGN
|
Hardness
DIN ISO 48-4 Shore A |
Density
DIN EN ISO 1183-1 g/cm3 |
---|---|---|---|
TL6OWG-BLCK | Black | 60 | 0.725 |
TL7OWG-BLCK | Black | 70 | 0.725 |
TL8OWG-BLCK | Black | 80 | 0.725 |
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values. |
The expected shelf life of the TPE granules is a minimum of 24 months from the date of delivery, provided that the storage instructions are followed and the product is kept in the unopened original KRAIBURG TPE packaging. Dry conditions at room temperature (below 40 °C/ 104 °F), away from heat sources and direct sunlight, must be maintained for proper storage. Contact with nitrogen oxides during storage should be avoided. |
For further information and individual custom solutions please contact our customer service. |
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound. |
On Off Region Article
Download
Event
ktpe_glossary_term
News
Press