You are here
Product Finder
>
MC Series
Login

MC Series

THERMOLAST® M

The MC series is your material solution for applications requiring basic medical approvals such as ISO 10993-5 and food regulations. The compounds are available in translucent colors and can be colored in many different ways. They are produced exclusively on a special medical unit.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Pharmaceutical packaging
  • Seals
  • Valves
  • Flexible Connections

 

Material advantages

  • Adhesion to PP, PE
  • Optimized compression set
  • Free from animal ingredients
  • Sterilizable (autoclave 134°C, ß-/y-radiation 2x35 kGy, EtO)
  • KRAIBURG TPE Medical Service Package
  • US DMF listed

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21
  • GB 4806.7-2023
  • VDI 2017
  • ISO 10993-4 (Hemolysis)
  • ISO 10993-5 (Cytotoxicity)
  • ISO 10993-10 (Intracutaneous injection)
  • ISO10993-11 (Acute systemic toxicity)
  • ISO8871-1 (Part 1: Extractables in aqueous autoclavates)
  • Compatible for HDPE Recycling certified by Cyclos HTP
  • Compatible for PP Recycling certified by Cyclos HTP

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Method B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
TM3MEP Translucent 29 0.890 6.5 750 10.0 18 28
TM4MEP Translucent 38 0.884 10.0 927 13.6 19 30
TM5MEP Translucent 50 0.890 10.5 850 15 24 33
TM6MEP Translucent 62 0.890 13.5 850 20.0 29 39
TM7MEP Translucent 70 0.890 14.0 850 25.0 33 45
TM8MEP Translucent 81 0.890 16.5 820 35 41 53
TM9MEP Translucent 92 0.890 17.5 700 45.0 58 66
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.