MC Series

THERMOLAST® M

The MC series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The compounds are available in translucent colors and can be colored in many different ways. They are produced exclusively on a special medical unit.

Processing Method: Injection Molding, Extrusion
Color / RAL DESIGN: Translucent

Typical applications

  • Pharmaceutical packaging
  • Seals
  • Valves
  • Flexible Connections

 

Material advantages

  • Adhesion to PP, PE
  • Optimized compression set
  • Free from animal ingredients
  • Vegan
  • Sterilizable (autoclave 134°C, ß-/y-radiation 2x35 kGy, EtO)
  • KRAIBURG TPE Medical Service Package

 

Regulations / Approvals *

  • Regulation (EU) No 10/2011
  • US FDA CFR 21
  • VDI 2017
  • ISO 10993-4 (Hemolysis)
  • ISO 10993-5 (Cytotoxicity)
  • ISO 10993-10 (Intracutaneous irritation)
  • ISO10993-11 (Acute systemic toxicity)
  • ISO8871-1 (Part 1: Extractables in aqueous autoclavates)

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
TM3MEP Translucent 27 0.890 6.0 650 9.0
TM4MEP Translucent 38 0.890 8.0 650 11.0
TM5MEP Translucent 50 0.890 9.0 700 13.0
TM6MEP Translucent 62 0.890 11.0 700 16.0
TM7MEP Translucent 71 0.890 12.0 700 22.0
TM8MEP Translucent 82 0.890 13.0 650 31.0
TM9MEP Translucent 92 0.890 15.0 650 44.0
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The product storage life is 24 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.