RC/UV Series

THERMOLAST® R

The RC/UV series is your material solution with a recycling content above 68% for applications requiring UV resistance and adhesion to PP. The compounds are suitable for automotive exterior applications and are available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Roof racks
  • Water deflectors
  • Cowls gaskets
  • Active Grill Shutter (AGS)
  • Air guide elements
  • A/B/C/D cappings and covers
  • Air intake duct and air filter
  • Door opener
  • Door trims
  • Wheel arch liner
  • Underbody guard  

 

Material advantages

  • Weather resistant, suitable for automotive exterior
  • Adhesion to PP
  • Sustainable material
  • Recycled raw material content
  • Reduced PCF compared to virgin compound
  • In-process recycling possible
  • Recycling-specific raw material influences are possible

 

Regulations / Approvals *

  • PV 3930 Florida (1 year)
  • PV 3930 Florida (2 years)
  • PV 3929 Kalahari (1 year)
  • VW 50123
  • BMW GS 93042
  • Mercedes-Benz DBL 5562

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
Recycled raw materials content
%
RR3LEZ-BLCK Black 33 0.980 6.0 850 100 69
RR4LEZ-BLCK Black 42 0.980 6.5 850 90 70
RR5LEZ-BLCK Black 53 0.980 7.0 800 80 69
RR6LEZ-BLCK Black 63 0.980 7.0 750 80 68
RR7LEZ-BLCK Black 70 0.980 8.0 700 70 69
RR8LEZ-BLCK Black 80 0.980 12.0 700 60 69
RR9LEZ-BLCK Black 89 0.980 12.0 600 50 72
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 24 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (below 40 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.