FC/HE/tl Series
THERMOLAST® K
The FC/HE/tl series is your material solution for everyday life applications with regulatory requirements. The series is characterized by its elastic properties. The translucent materials can be colored in many different ways. The series is characterized by its adhesion to PP and PE.
Processing Method:
Injection Molding, Extrusion
Color / RAL DESIGN:
Translucent
Typical applications
- Household articles
- Flexible Connections
- Membranes
- Seals for housings
- Valves
- Packaging (for food and care products)
- Closures
- Toys
Material advantages
- Hysteresis
- Colorable
- Optimized mechanical properties
- In-process recycling possible
- Elasticity
- Adhesion to PP
- Free from animal ingredients
- Soft touch surface
- Halogen-free (according to IEC 61249-2-21)
Regulations / Approvals *
- Regulation (EU) No 10/2011
- US FDA CFR 21 (raw material conformity)
- EN71-3
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
All values published in this data sheet are rounded average values. |
The product storage life is 12 months after delivery if storage instructions are followed. Store under dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage! |
For further information and individual custom solutions please contact our customer service. |
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound. |
On Off Region Article
Download
Event
News
Press