You are here
Product Finder
>
UV/FG Series
Login

UV/FG Series

THERMOLAST® K

The UV/FG series is your material solution for applications requiring UV resistance and adhesion to PP. The compounds are suitable for automotive exterior applications and available in black.

Processing Method: Injection Molding
Color / RAL DESIGN: Black

Typical applications

  • Roof racks
  • Static window encapsulations
  • Water deflectors
  • Bumpers
  • Cowls gaskets
  • Function and design elements
  • Automotive Exterior
  • Door sills

 

Material advantages

  • Weather resistant, suitable for automotive exterior
  • Optimized flow properties
  • Surface mapping
  • Optimized mechanical properties
  • Adhesion to PP
  • In-process recycling possible
  • Temperature stability up to 100 °C

 

Regulations / Approvals *

  • 49 CFR §571.302 (FMVSS 302)
  • PV 3930 Florida (1 year)
  • PV 3930 Florida (2 years)
  • PV 3929 Kalahari (1 year)
  • PV 3929 Kalahari (2 years)
  • Outdoor Weathering Florida 24 month SAE J1976
  • Outdoor Weathering Arizona 24 month SAE J1976
  • VW 50123
  • BMW GS 93042
  • Daimler DBL 5562
  • PSA B62 0300
  • Renault 03-10-104
  • GM GMW 16233

 

Please choose language of datasheet
PDF file - 1MBDeutsch
PDF file - 1MBEnglish
PDF file - 1MBEspañol
PDF file - 1MBFrançais
PDF file - 1MBItaliano
PDF file - 1MB日本語
PDF file - 1MB한국어
PDF file - 1MBPolski
PDF file - 1MB中文
X

SHARE FILE

Send
Compound name
Color / RAL DESIGN
Hardness
DIN ISO 48-4
Shore A
Hardness
DIN ISO 48-4
Shore D
Density
DIN EN ISO 1183-1
g/cm3
Tensile Strength 1
DIN 53504/ISO 37
MPa
Elongation at Break 1
DIN 53504/ISO 37
%
Tear Resistance
ISO 34-1 Methode B (b) (Graves)
N/mm
CS 72 h/23 °C
DIN ISO 815-1 Method A
%
CS 24 h/70 °C
DIN ISO 815-1 Method A
%
CS 24 h/100 °C
DIN ISO 815-1 Method A
%
Flow Spiral [760 bar, 200 °C]
DSOP Lab 2032
cm
TC3LEZ Black 33 - 0.980 6.0 800 8.0 19 34 68 107.0
TC4LEZ Black 42 - 0.980 6.0 800 12.0 16 34 61 98.0
TC5LEZ Black 55 - 0.980 7.0 800 15.0 29 41 73 95.0
TC6LEZ Black 63 - 0.980 9.0 750 17.0 34 45 72 86.0
TC7LEZ Black 70 - 0.980 10.0 700 21.0 35 47 74 79.0
TC8LEZ Black 80 - 0.980 11.0 700 28.0 34 55 78 76.0
TC9LEZ Black 89 - 0.980 14.0 650 39.0 44 59 75 60.0
TC0LEZ Black - 35 0.980 20.0 600 55.0 53 65 82 45.0
1Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min.
 
Tested on 2 mm sample plaque, under artificial weathering according to PV3930 with two year cycles, the color change is > 4 on greyscaleVW3930 weathering for warm and humid conditions:Test time 1600 h / Rel. moisture 60 to 80 % / Temperature of sample compartment 35 °C to 45 °C / Radiation dosage 350 MJ/m²
All values published in this data sheet are rounded average values.
The shelf life of the TPE granules is 12 months from delivery if storage instructions are observed and the product is stored in the unopened original KRAIBURG TPE packaging. Store in dry conditions at room temperature (15–30 °C) away from heat sources and direct sunlight! Contact with nitrogen oxides must be avoided during storage!
For further information and individual custom solutions please contact our customer service.
* Regulations a compound complies with and approvals granted are displayed here. Please note: All regulations and approvals for all compounds of a series are collectively shown in the overview of the respective product series, i.e. not all regulations and approvals shown in the overview apply to each individual compound.